[. . . ] Quick Guide PORTABLE MINIDISC RECORDER MODEL MD-MT90H Quick Setup Guide Follow the setup procedure (1-3) before you use this unit. Quick Operation Guide Explains basic recording and playback procedures. Refer to the operation manual for details. If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. [. . . ] Level meter indicator 0dB 4dB This unit can adjust the digital recording level just the same as the analogue recording. Continued to the next page Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Recording: continued 4 Press the PAUSE button on the stereo system to enter the playback pause mode. Here you can search for the track to record. 5 Press the PLAY/PAUSE button to start the MiniDisc unit recording. 6 Begin playback on the stereo system, the output will be recorded. To stop recording Press the s / :OFF button. q When recording stops, "TOC" appears. Whilst "TOC" appears the MiniDisc recorded contents have not yet been updated. q To prevent the new recording from being lost it is not possible to remove the MiniDisc whilst "TOC" is displayed. TOC display About the TOC After any recording or editing function "TOC" (Table Of Contents) is displayed. To finalise the recording or editing function, press the s / :OFF button. [. . . ] Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) [. . . ]